http://ciscoequipmentdeals.com/how-to-setup-cisco-switches-with-vlan/ Cisco Networking Hardware for Sale Mon, 14 Dec 2009 07:24:35 -0600 http://wordpress.org/?v=2.8 hourly 1 http://ciscoequipmentdeals.com/how-to-setup-cisco-switches-with-vlan/comment-page-1/#comment-4657 fioresa1 Mon, 02 Nov 2009 13:44:33 +0000 http://ciscoequipmentdeals.com/how-to-setup-cisco-switches-with-vlan/#comment-4657 Database SwitchA # vlan SwitchA (vlan) # vlan 2 name VLAN2 SwitchA (vlan) # exit SwitchA # configure terminal SwitchA (config) # interface FastEthernet 0/1 SwitchA (config-if) # modalità of access switchport SwitchA (config-if) # vlan approached swichport 2 SwitchA (config-if) # end Database SwitchA # vlan
SwitchA (vlan) # vlan 2 name VLAN2
SwitchA (vlan) # exit
SwitchA # configure terminal
SwitchA (config) # interface FastEthernet 0/1
SwitchA (config-if) # modalità of access switchport
SwitchA (config-if) # vlan approached swichport 2
SwitchA (config-if) # end

]]> http://ciscoequipmentdeals.com/how-to-setup-cisco-switches-with-vlan/comment-page-1/#comment-4656 cyphish Mon, 02 Nov 2009 13:09:05 +0000 http://ciscoequipmentdeals.com/how-to-setup-cisco-switches-with-vlan/#comment-4656 That the syntax is correct settng a VLAN on a port. The only other problem that would need to check would be to ensure that the switch is set to have VTP server setting. Transparent or client will not send the information to other switches, or go through and do it manually on each switch. For more on your door make sure you have access VLAN 2 and VLAN switchport access switch ports on each door. I tend to have a trunk my connections to each switch. This can be done by   int Fa0 / 1   switchport mode trunk That the syntax is correct settng a VLAN on a port. The only other problem that would need to check would be to ensure that the switch is set to have VTP server setting. Transparent or client will not send the information to other switches, or go through and do it manually on each switch. For more on your door make sure you have access VLAN 2 and VLAN switchport access switch ports on each door. I tend to have a trunk my connections to each switch. This can be done by
  int Fa0 / 1
  switchport mode trunk

]]>